This listing is for the damper mount ONLY. You can only use this kit if have the rest of the components such as the mounting hardware, pin holder as well.
This product is suitable for those who have purchased our Version 1.0 Scotts damper mount kit and wish to upgrade it to version 2.0 to be able to install Xtrig PHDS handlebar clamps on their bikes. If you do not have the rest of the kit, buy the damper mounts we have available for your bike and there you can specify you want the version 2.0 mount with the kit.
This damper mount is compatible with Xtrig PHDS 5010008 available in our store. It allows you to install it on ALL FOUR available positions on the damper mount.
Similar to version 1.0 , it does that by providing you with two sets of threaded holes with 11mm offset in combination with the PHDS's built in +/-4mm offset. You rotate 180 degrees the PHDS to gain an additional 4mm of offset just like the stock clamps. That gives you four possible installation options.
On our version 1.0 damper mount you could only install the PHDS on the most forward position with the optional spacers that came with the PHDS. A wide grip on the handlebar (108mm vs 90mm) provides more room for the PHDS to be installed in any position you desire!
- KTM 790 / 890 Adventure (R) - all models
- KTM 1050 Adventure
- KTM 1090 Adventure R
- KTM 1190 Adventure (R)
- KTM 1290 - all models
Attention KTM 790/890 owners: If you have a stepped arm on your steering damper, you will need to replace that with a flat arm (+10 or +12) to use this kit.